Measurement of integrated luminosities at BESIII for data samples at center-of-mass energies between 4.0 and 4.6 GeV

The integrated luminosities of data samples collected in the BESIII experiment in 2016–2017 at center-of-mass energies between 4.19 and 4.28 GeV are measured with a precision better than 1% by analyzing large-angle Bhabha scattering events. The integrated luminosities of old datasets collected in 2010–2014 are updated by considering corrections related to detector performance, offsetting the effect of newly discovered readout errors in the electromagnetic calorimeter, which can haphazardly occur.     

Application of advanced nuclear analytical techniques for the electrocatalyst's characterization: Paving the path for mechanistic investigations

As the application of electrocatalyst continues to expand, envisaging the hidden mechanisms occurring at various length scale affecting the catalytic efficiency became important. To enhance the stability of electrocatalyst and reduce the cost, it is of paramount importance to reveal the active site's dynamics (using in situ techniques for getting the real-time information) which directly affect the reactions such as oxygen evolution reaction, hydrogen evolution reaction, and so on. Since such reactions are crucial for many engineering and scientific applications, in situ characterization techniques are required, which could capture such reactions happening at a different length and time scale. This article analyzes the recent progress made in the field of electrocatalyst's characterization using in situ neutron techniques. The article also paves the future path and has delineated the future challenges involved in multiscale correlative techniques (e.g., neutron techniques in the combination of synchrotron or microscopic techniques) used for getting the multiscale (atomic to micrometer range) mechanistic information about the electrocatalyst's working and degradation.     

Non‐self‐adjoint singular second‐order dynamic operators on time scale

In this study, maximal dissipative second‐order dynamic operators on semi‐infinite time scale are studied in the Hilbert space , that the extensions of a minimal symmetric operator in limit‐point case. We construct a self‐adjoint dilation of the dissipative operator together with its incoming and outgoing spectral representations so that we can determine the scattering function of the dilation as stated in the scheme of Lax‐Phillips. Moreover, we construct a functional model of the dissipative operator and identify its characteristic function in terms of the Weyl‐Titchmarsh function of a self‐adjoint second‐order dynamic operator. Finally, we prove the theorems on completeness of the system of root functions of the dissipative and accumulative dynamic operators.     

Optimal time delays in a class of reaction-diffusion equations

ABSTRACT

A class of semilinear parabolic reaction diffusion equations with multiple time delays is considered. These time delays and corresponding weights are to be optimized such that the associated solution of the delay equation is the best approximation of a desired state function. The differentiability of the mapping is proved that associates the solution of the delay equation to the vector of weights and delays. Based on an adjoint calculus, first-order necessary optimality conditions are derived. Numerical test examples show the applicability of the concept of optimizing time delays.     

原子系综中光学腔增强的Duan-Lukin-Cirac-Zoller写过程激发实验

原子系综中的Duan-Lukin-Cirac-Zoller(DLCZ)过程是产生光与原子(量子界面)量子关联和纠缠的重要手段.当一束写光与原子发生作用时,将会产生斯托克斯(Stokes)光子的自发拉曼散射,并同时产生一个自旋波(spin-wave)存储在原子系综中,上述过程即为DLCZ量子记忆产生过程.这一过程被广泛地研究.本文将87Rb原子系综放入驻波腔,并使Stokes光子与光学腔共振,我们观察到有腔且锁定的情况下Stokes光子产生概率比无腔时增大了8.7倍.在此条件下研究了Stokes光子产生概率和写光功率的关系,Stokes光子产生概率随写光功率线性增大.     

改进的PNC方法及其在非线性偏微分方程多解问题中的应用

2017年，李昭祥等提出了一种偏牛顿-校正法（Partial Newton-Correction Method，简记为PNC方法），并利用它成功地计算出了三类非线性偏微分方程的多重不稳定解.本文在PNC方法的基础上，提出并发展了一种改进的PNC方法.首先，利用Nehari流形$\mathcal{N}$与零平凡解的可分离性，建立并证明了$\mathcal{N}$的某特殊子流形$\mathcal{M}$上的全局分离定理及其推广（即局部分离定理）.全局分离定理只跟非线性偏微分算子或相应的非线性泛函本身有关，而与具体的计算方法无关.对一些典型的非线性偏微分方程多解问题（比如，Henon方程问题），该全局分离定理的分离条件，经验证是成立的.另一个方面，通过修改或补充原辅助变换的定义，去掉了原辅助变换的奇异性；接着建立并证明了某些非线性偏微分方程问题的新未知解与该非线性偏微分算子零核空间的密切关系；在证明中，去掉了在原奇异变换下所需的标准收敛（standard convergence）假设.最后，计算实例与数值结果验证了改进的PNC方法的可行性和有效性；同时表明子流形$\mathcal{M}$与已知解的可分离性是PNC方法和本文新方法能成功找到多解的关键.     

Comparative structural analysis of a histone-like protein from Spiroplasma melliferum in the crystalline state and in solution

A solution of a histone-like protein from Spiroplasma melliferum (HUSpm) was examined by small-angle X-ray scattering (SAXS). The experimental SAXS curve was compared with those calculated for the HUSpm structures from the PDB databank obtained by both X-ray diffraction analysis and nuclear magnetic resonance spectroscopy. The model of the HUSpm structure in solution, which best agrees with the experimental SAXS data, has a shorter distance between the centers of mass of the HUSpm monomers compared to the crystal structure, indicating that the HUSpm monomers can be located closer to each other in solution than in the crystalline state.     

Lamb波频域逆散射全聚焦成像方法研究

Lamb波因其传播距离远、衰减小常被用于板状结构的无损检测中,在基于Lamb波损伤检测的诸多成像技术中,全聚焦方法(Total Focus Method,TFM)方法因其成像分辨率高、信噪比高而受青睐。然而Lamb波的频散效应导致时域延时量不能被准确计算,进而影响传统TFM方法对损伤定位及成像的精度;此外,既有的TFM方法仅以回波幅值作为成像指标,忽略了Lamb波与损伤的相互作用,故而不能通过损伤表面的物理参数增强成像质量。针对这两个问题,本文首先在时域TFM基础上发展了频域TFM,在计算中纳入频散关系以规避频散的影响;其次以包含明确的损伤特征参数--反射率为成像指标,结合频域TFM方法建立损伤逆散射模型,以实现对损伤的准确成像。仿真和实验结果表明:频域逆散射TFM成像方法能够实现对铝板结构中的损伤检测,在工程实践中具有应用价值。     

基于CARS技术的超燃冲压发动机点火过程温度测量

相干anti-Stokes Raman散射（coherent anti-Stokes Raman scattering，CARS）技术作为一种非接触测量手段，已广泛应用于多种发动机模型燃烧室温度测量及地面试验.然而，目前的工作主要集中在稳态燃烧场温度的测量，缺乏用高分辨率的单脉冲来测量瞬变的燃烧火焰温度及组分浓度的研究.基于CARS理论，结合多参数拟合算法，开发了基于MATLAB的CARS光谱计算和拟合程序CARSCF；利用McKenna平面火焰炉在不同工况下进行了温度测量，并与DLR测量结果进行对比，结果显示开发的CARSCF具有较高的测量重复性和准确性；最后将CARS技术应用于测量超燃冲压发动机点火过程中的温度测量，获取了点火过程中的温度.结果显示，在来流Mach数为3的条件下，H₂/air点火过程中温度呈现急剧上升然后缓慢下降，而CARS信号则呈现急剧上升然后急剧下降随后又缓慢上升的趋势，并且在点火过程中最高温度为1 511 K.